iPollo V1 power supply requirements and recommendations

iPollo V1 Power Supply Requirements and Recommendations

Cryptocurrency mining is a power-intensive operation, and selecting the right power supply (PSU) is crucial for maximizing efficiency, stability, and profitability. The iPollo V1, a high-performance Ethash miner with a 3600 MH/s (±10%) hashrate, demands careful power considerations to ensure optimal operation.

In this guide, we’ll explore the power supply requirements for the iPollo V1, discuss key factors in selecting a PSU, and provide practical recommendations to help miners avoid common pitfalls.

Understanding the iPollo V1’s Power Demands

Before choosing a power supply, it’s essential to understand the iPollo V1’s power consumption and electrical specifications:

  • Rated Power Consumption: 3100W (±10%)
  • Voltage Requirements: 200-240V AC (recommended for efficiency)
  • Operating Temperature: 10-25°C (proper cooling is critical)

Given these specs, the iPollo V1 requires a high-wattage, high-efficiency PSU to handle its power draw consistently.

Why Power Supply Selection Matters

A mismatched or low-quality PSU can lead to:

  • Instability & Frequent Shutdowns – Insufficient power causes crashes.
  • Reduced Efficiency & Higher Costs – Inefficient PSUs waste electricity.
  • Premature Hardware Failure – Voltage fluctuations can damage components.

To avoid these issues, miners must choose a PSU that meets the iPollo V1’s power demands while maintaining reliability.

Key Factors in Choosing a PSU for the iPollo V1

1. Wattage & Power Delivery

The iPollo V1 consumes ~3100W under full load, meaning the PSU must:

  • Provide at least 3100W continuous power (preferably with overhead).
  • Support 200-240V input for optimal efficiency (110V operation is possible but less efficient).

Recommended: A 3200W+ PSU (such as the HP3-3200W or APW12) to ensure stable power delivery.

Article image 1

2. Efficiency & 80 Plus Certification

Higher efficiency PSUs reduce energy waste and lower electricity costs. Look for:

Article image 2

  • 80 Plus Platinum or Titanium (best for mining)
  • 80 Plus Gold (good balance of cost and efficiency)

A Platinum-rated PSU can save 5-10% in power costs compared to lower-rated models.

3. Single vs. Dual PSU Setup

Some miners use dual PSUs (e.g., two 1600W units) instead of a single high-wattage PSU.

Pros of Dual PSUs:

  • Redundancy (if one fails, the miner may still operate at reduced capacity).
  • Easier to source (1600W PSUs are more common than 3200W).

Cons of Dual PSUs:

  • Requires a dual PSU adapter (adds complexity).
  • Slightly less efficient than a single high-wattage PSU.

Recommendation: A single 3200W+ PSU is preferable for simplicity and efficiency.

Article image 3

4. Connector Compatibility

The iPollo V1 requires:

  • Dual 8-pin PCIe connectors (for power delivery).
  • Standard C13/C14 power cables (for AC input).

Ensure the PSU has the correct connectors to avoid needing adapters.

Article image 4

5. Cooling & Durability

Mining PSUs run 24/7, so they must have:

  • High-quality fans (ball-bearing fans last longer).
  • Overload & surge protection (prevents damage from power spikes).

Recommended Brands:

  • HP3 / HP4 (Bitmain) – Reliable, widely used in mining farms.
  • APW12 (MicroBT) – High efficiency, durable.
  • EVGA / Corsair (for lower-wattage setups) – Good for smaller operations.

Recommended Power Supplies for the iPollo V1

Based on real-world mining operations, here are the best PSU choices for the iPollo V1:

1. HP3-3200W (Bitmain) – Best Overall Choice

  • 3200W continuous power (handles the iPollo V1 with overhead).
  • 80 Plus Platinum efficiency (reduces power waste).
  • Dual 8-pin PCIe connectors (compatible without adapters).

Ideal for: Large-scale mining farms and professional miners.

2. APW12 (MicroBT) – High-Efficiency Alternative

  • 3600W capacity (future-proof for upgrades).
  • Modular design (easier cable management).
  • High durability (designed for 24/7 mining).

Ideal for: Miners who want extra power headroom.

3. Dual 1600W PSUs (Budget Option)

  • Two 1600W PSUs (e.g., EVGA 1600W Gold).
  • Requires a dual PSU adapter (adds complexity).

Ideal for: Miners who already own 1600W PSUs.

Power Setup Best Practices for the iPollo V1

1. Use a Dedicated Circuit

  • The iPollo V1 draws ~13-15A at 220V, so it needs:
  • A 20A circuit (minimum).
  • Avoid sharing circuits with other high-power devices.

2. Monitor Voltage Stability

  • Fluctuations below 200V can cause instability.
  • Use a voltage regulator if your grid is unreliable.

3. Optimize Cooling

  • The iPollo V1 operates best at 10-25°C.
  • Ensure proper airflow to prevent overheating.

4. Regular Maintenance

  • Clean dust from PSU fans every 3-6 months.
  • Check for loose connections periodically.

Conclusion: Maximizing iPollo V1 Performance with the Right PSU

The iPollo V1 is a powerful miner, but its 3100W power demand requires careful PSU selection. By choosing a high-efficiency 3200W+ PSU (like the HP3-3200W or APW12), miners can ensure stable operation, lower electricity costs, and longer hardware lifespan.

For those on a budget, dual 1600W PSUs can work but introduce extra complexity. Always prioritize 80 Plus Platinum efficiency, proper cooling, and stable voltage to maximize mining profitability.

By following these guidelines, miners can optimize their iPollo V1 setup and achieve the best possible return on investment. Happy mining!